Europrene SOL T 6414 is a radial block copolymer obtained by anionic polymerisation. The polymer is based on styrene and butadiene, where bound styrene Is 40% wt and diblock content is 22%. A non-staining antioxidant system is added during the production process.
Europreneg SOL T 6414 is a radial block copolymer, characterised by excellent dispersability, processability and thermo-oxidative resistance, combined with high strengthe elongation and hardness,
Europrene SOL T 6414 is designed for hot melt adhesive applicattons: the grade shows high compatibility with tackifiers and imparts low melt products and an excellent balance of adhesive and cohesive properties to the hot met products. The grade is also used in footwear compounds, particularly Where smooth and glossy surface finishing is required. Characterized by the excellent processability, SOL T 6414 is widely used in the modification of polymers and in plastic recycling.
The product is supplied from Ravenna Plant (Italy) In pellet form.
Available in bags on pallet big begs and wooden crates. For detailed informationr please refer to your versails representative .
Store the preparation in a covered place in sealed packaging, away from sunlight and heat sources. Ensure the proper ventilation in all storage areas.
Shelf life: 18 months
Please consult the relevant safety data sheet for more detailed information. The information and data presented herein are to the best of our knowledge true and accurate, but no warranty or guarantee, expressed or implied is made nor is any liability accepted with respect to the use of such information and data.
|PROPERTIES||Test Method||Unit||Typical Value|
|Specific Gravity||ASTM D 792||g/cc||0.95|
|Tensile strength||ASTM D 412||MPa||26.0|
|Elongation at break||ASTM D 412||%||850|
|300% Modulus||ASTM D 412||MPa||3.9|
|Hardness||ASTM D 2240||Sh A||88|
|Melt Flow Index||ASTM D 1238||g/10min||11.0|
|Brookfield Viscosity||ASTM D 1084||Pa.s||0.4|
© Copyright 2017 Dycon Chemicals