Europrene® SQL T 190 is a linear block copolymer obtained by anionic polymerisation. The polymer is based on styrene and isoprene, where bound styrene content is 16% wt and diblock content is 25 %. A non-staining, TNPP free artioxidant system is added during the production process.
|PROPERTIES||Test Method||Unit||Typical Value|
|Specific Gravity||ASTM D 792||g/cc||0.92|
|Tensile Strength||ASTM D 412||MPa||12.0|
|Elongation at break||ASTM D 412||%||1200|
|300% Modulus||ASTM D 412||Mpa||1.0|
|Hardness||ASTM D 2240||sh A||30|
|Melt Flow Index||ASTM D 1238||Sh A||9.0|
|Brookfield Viscosity||ASTM D 1084||Pa.S||1.0|
Europrene® SOL T 190 is an easy processable, general purpose grade, characterized by an optimum balance of adhesive and cohesive properties.
The polymer is designed for hot melt pressure-sensitive adhesive applications. Europrene ® SOL T 190 is also used in bitumen modification when enhanced adhesive properties are required.
The product is supplied from Ravenna Plant (Italy) in pellet form.
Available in bags on pallet, big bags and wooden crates. For detailed information, please refer to your PE representative.
Store the preparation in a covered place in sealed packaging, away from.
sunlight and heat sources. Ensure the proper ventilation in all storage areas.
Shelf life:18 months
© Copyright 2017 Dycon Chemicals